[SOLVED] 20 pin 0.1" to 10-pin 0.05" JTAG adapter

shuodo · Dec 13th 2019, 7:37pm

Hi,

My JETSON-AGX-Xavier has an 10-pin (2x5, 0.05 inch pitch) JTAG header. So I need a 20 pin 0.1" to 10-pin 0.05" JTAG adapter to connect my J-Link to my Xavier's JTAG header.

I want to know will one of these works (or both work):
segger.com/products/debug-prob…s/9-pin-cortex-m-adapter/
segger.com/products/debug-prob…mil-10-pin-patch-adapter/

Also, does "segger-50-mil-10-pin-patch-adapter" include an .05" 10-pin ribbon cable? Or I have to buy cable separately?

Thanks,

SEGGER - Alex · Dec 17th 2019, 12:11pm

Hi,

The patch adapter comes with a 0.05" cable (the photos actually show the package contents).
Both adapters you listed will work. However, the 9-pin Cortex-M one may be less hassle for you as nothing needs to be wired manually.

[SOLVED] 20 pin 0.1" to 10-pin 0.05" JTAG adapter

[SOLVED] 20 pin 0.1" to 10-pin 0.05" JTAG adapter

Share

Tags