We are planing on using the ZGM130S037HGN from silabs. Would like to use the J-Link programmer to program the chip. I understand support might be included in the next Beta Release. When is support for the ZGM130S037HGN scheduled for? How can I get access to Beta release if it supports ZGM130S037HGN?

Thanks,

CFV

Hi Nino,

Thank you for your prompt reply. The ZGM130S037HGN is a Silicon Labs chip (like the EFM8) Segger also supports the EFR32FG13PxxxF512 from Silicon Labs. The core is an M4.

I'll try the instructions that you provided for "Using a Precompiled Flashloader". Also I forgot to mention that I'm using the Linux ARM version of J-Link.

I'll let you know if that works.

Thanks,

CFV

I tried the instructions:

1. Open JLinkDevices.xml in a text editor and add the device entry at the beginning, right after the <Database> opening tag.
   Example:
   <!-- This entry will overwrite the existing device entry in the J-Link software, so that a custom flash algorithm is used for the internal flash --> <ChipInfo Vendor="ST" Name="STM32F767ZI" Core="JLINK_CORE_CORTEX_M7" /> <FlashBankInfo Name="Internes Flash" BaseAddr="0x08000000" MaxSize="0x00200000 " Loader="ST_STM32F7xxxx_2MB_DualBank.elf" LoaderType="FLASH_ALGO_TYPE_OPEN" /> </Device>
2. Copy the flashloader file, referenced in the JLinkDevices.xml entry, into the same directory where also the JLinkDevices.xml is located (in this example ST_STM32F7xxxx_2MB_DualBank.elf).
   

The problem is that I don't have an .elf loader file. Where would I get the appropriate file for my device?