Search Results

Hi Nino, Thanks for your reply. I’ll let my colleague to fill the ticket. Ohnail

Hi, Does J-Link support RISC-V 64 bit core? I want to use it to debug Kendryte K210 CPU. It is a 400MHz Dual RISC-V 64bit IMAFDC(RV64GC) CPU. BTW, may I use Embedded Studio or Ozone with the K210 CPU? Thanks. Ohnail

Hi Niklas, I'm glade to see you have fixed this issue. What a great AGILE development method you're using! Thank you very much! Ohnail 7th Oct.

Hi Sir, I'm using J-Link Pro 5V output. It looks the value of target current in the website is error. Maybe the unit should be uA, not mA. Please help to confirm. Thank you. forum.segger.com/index.php/Attachment/1960/ Ohnail 1st Oct 2017

Hi Niklas, That great!!! Waiting. I'm using J-Link Pro V4.3. Hope it won't out of date. Thanks! Ohnail 2017.9.18

Hi Sir, I checked the support list and found the Cortex-A53 core is not in the support list. I tried to use my J-Link Pro to debug the Qualcomm APQ8053 with the Cortex-A17 configure, it looks J-Link Pro can read system registers correctly but can't halt it. May I know whether you have the plan to support Cortex-A53? J-Link is really good to debug the bootloader. If it can be used in ARMv8 platform, that would be wonderful! Thanks a lot. Ohnail 2017.9.16

Hi Segger team, I found the command savebin can't work on my Win7 64 bit OS. It is a bug or an authority issue? e.g. J-Link>savebin Syntax: savebin <filename>, <addr>, <NumBytes> (hex) J-Link>savebin c:\a.bin,0,2000 Opening binary file for writing... [c:\a.bin] Reading 8192 bytes from addr 0x00000000 into file...O.K. But I can't find the file named a.bin in my c: path. Could you kindly spend time to have a look? Thanks a lot. Ohnail 2016.8.26

Hi Niklas, Thank you! I'll purchase J-Link V10. Ohnail

Hi Niklas, Thanks a lot for your quick reply. I've more questions about V10 since I can't find any information from the spec. 1. May I know which models have updated to V10? BASE? PLUS? EDU? 2. You said V10 offers High-Speed USB, is that means V10 is faster than V9? May I get some data about the speed difference? Thanks again. Ohnail

Hi Sir, I heard from Windway that J-Link V10 has released. May I know what's the different between V9 and V10? If I have V9 model, is it necessary to update? Thanks a lot. Ohnail

Hi Niklas, Thanks a lot for your work. I'm testing the new version V5.10a. It looks flasher can re-program the secured D20 after firmware update. But I failed serval times, not every time passed. I'm trying to exclude hardware issues. Another thing need confirm here. When D20 has been secured, Flasher read the chip will erase the flash and the erase can't be disabled. Am I right? Thanks again.

Hi Niklas, Thanks a lot for your below confirm. Quote: “Currently, the initial connect for ATSAMD20 devices fails in standalone mode if the target is secured. Therefore, unlocking ATSAMD20 devices by using the Init steps is not possible.” May I ask more about this issue? Is that possible to use J-Link script file to realize adding initial steps before the initial connect? Thanks again. Best regards, Ohnail 2015.11.18

forum.segger.com/index.php/Attachment/818/ forum.segger.com/index.php/Attachment/819/ It also can be used in online mode. But it can't run in standalone mode. Could you help me to check what's wrong with my operation? Thanks again. Best regards Taoist 2015.11.13

Hi Niklas, Thank you very much again. Please forgive my poor English. It makes you confusion. Quote: “Usual production procedure should be: 1) Programming the target device. 2) Locking the device via exit-steps.” Yes, I used same step with you. Below is my configuration. forum.segger.com/index.php/Attachment/815/ forum.segger.com/index.php/Attachment/816/ forum.segger.com/index.php/Attachment/817/ The Flasher runs very well when the target chip is unsecured. In online mode, I can re-program it b…

Hi Niklas, Thanks a lot for your quick response. Quote: “SEGGER Flasher Standalone is designed for production purposes. At the start of a production process, devices are not unsecured.” Yes, at the start of production process, the devices are unsecured. But we can't guarantee the operation of the worker. If he/she pressed two program button, it would show fail. Another case, if the firmware updated, the worker need rework the locked chips. As R&D, we should prepare solutions for them. Am I right…

Hi Sir, I'm using the Flasher portable to program Atmel ATSAMD20G17. I found below issues. 1) J-Flash doesn't support D20 Lock/unlock directly. Is it right? 2) When D20 has locked, Flasher portable always fail in re-program it. The log only display FAIL. I can't find any solutions. 3) The old version J-Flash, like V496l, if you select chip erase, the flasher won't erase the sector 0x804000 to 0x80401F. But the new version J-Flash, like V5.02i, the flasher will erase the sector No. 512. Is it rig…

Hi Sir, I found J-Link V10.1 has released. May I know the difference between V9 and V10/V10.1? Appreciation. Ohnail

Great! Really thanks a lot.

Hi Alex, I have a J-Link V9.2. I heard J-Link has updated to V9.3. I wonder know what's the difference between the V9.2 and V9.3. Is it necessary to update to V9.3? Thanks. Ohnail 2014.10.2

Hi Alex, Thanks a lot for your hard work! Ohnail