I have a PineTime development kit which is a nRF52 chip. I can connect to it with a ST-Link using OpenOCD but not my JLink Plus Compact. I get the following message:
LOG: J-Link RTT Viewer V7.80c: Logging started.
LOG: Terminal 0 added.
LOG: Connecting to J-Link via USB...
LOG: Device "NRF52" selected.
ERROR: Could not connect to target device.
I am using the following connections:
[Blocked Image: https://cdn.discordapp.com/attachments/62…754d6150c0d52e&]
Which are supported by the PineTime Wiki Reprogramming the PineTime - PINE64:
[Blocked Image: https://cdn.discordapp.com/attachments/62…1b8b65b65ca59&=]