How do I suppress "device is secured" popup msg by forcing Yes from jlink script? (unattended)
Without clicking remember.
Isn't there a forced parameter to "Erase all" command?
I tried:
unlock NRF52805_XXAA
but it says:
Syntax: unlock <DeviceName>
---Supported devices---
LM3Sxxx [<Auto>]
Kinetis
EFM32Gxxx
LPC5460x
surely it must know how to do it, because it does it after I click yes.
Hello,
You can prevent such popups with the command string SuppressGUI.
For more details, please refer to the SuppressGUI Command String.
Best regards,
Simon
I added into .jlink file, but when I run the file with
JLink.exe" -NoGui 1 -CommandFile test.jlink
it says:
J-Link>device NRF52805_XXAA
J-Link>SuppressGUI
Unknown command. '?' for help.
also this fails too:
JLink.exe SuppressGUI -NoGui 1 -CommandFile test.jlink
and I still see
Hello,
Try exec SuppressGUI in your .jlink file.
Best regards,
Simon
Hello,
That's what I did, but as I said it says this when I run the .jlink file:
J-Link>SuppressGUI
Unknown command. '?' for help.
Hello,
I apologize if I have expressed myself unclearly.
SuppressGUI is an J-link Command string not an command for the J-Link Commander.
However, you can execute J-link Command string in the commander with the exec command, so in your case you need to write: exec SuppressGUI.
Not only SuppressGUI.
https://wiki.segger.com/J-Link_Command…Command_Strings
Best regards,
Simon
I tried both in .jlink
Exec.Command("SuppressGUI")
exec SuppressGUI
But still seeing pop up.
Don’t have an account yet? Register yourself now and be a part of our community!
