SEGGER - Fabian Administrator

  • Member since Aug 30th 2019
Last Activity

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Fabian -

    Replied to the thread How to enable vcom function before connect target with swd..

    Post
    Hi, Quote from tinydrop: “I connect target device with swd (7pin 9pin 2pin) ” It should be: 7 - SWDIO 9 - SWCLK 1 - VTREF (not 2) 5 - J-Link-Tx (J-Link out => Target in) 17 - J-Link-Rx (J-Link in => Target out) One of the pins you mention is wrong. If…