SEGGER - SebastianB Administrator

Hi, Did you setup the project correctly for long long printing support? (Code > Printf/Scanf > Printf Integer Support set to "Long Long") "sprintf" does of course exist and may simply be used after including "stdio.h". Could you check whether the…

Hi, thank you for your inquiry. Which compiler are you currently using for assembler code? Only the unified syntax is supported when using the SEGGER compiler, meaning the divided syntax is not supported at this point. Switching to GCC should solve…

Hello, Thank you for the explanation! This would require the application to be built position-independent. This is rather unusual on embedded devices and does come with many limitation which have to be noted. The Project may be configured regarding…

Hello, Thank you for your inquiry. 1) The built-in formatter is based on clang and as such supports all options available there. Previously most of these were listed each, but to support all current and future commands this was changed to the single…

Hello, Thank you for your inquiry. The attachment unfortunately did not work, what is the exact error message? The issue may be related to an incorrect project configuration. We generally recommend to use a CPU support package when first setting up a…

Hello, Thank you for your inquiry. Most likely the library I/O type is not correctly set in the project. Please take a look here for more information: https://wiki.segger.com/Embedded_Studio_Library_IO Best regards, SebastianB

Hello, Thank you for your inquiry. All older versions up until V4.10 may be found on our website: segger.com/downloads/embedded-studio/ Best regards, SebastianB

Hello, Thank you for your inquiry. I am not completely sure whether I understand you correctly. Could you please elaborate what you are trying to do? Are the applications in B and C simply mirrored or do they differ in some way? Should both…