SEGGER - Alex Administrator

Hi, Does not sound familiar. In general, Flashers do neither support RTT nor HSS (both J-Scope modes) so it is simulated on the PC side. As you observed: With much less throughput I do not see why timestamps and values should get corrupted if the TIF…

Does it also happen when issuing the reset via J-Link Commander? Use „r“ to reset Use „mem32 <Addr>“ to read the PLLCFGR

As you have also contacted us in parallel via another channel, we will continue communication on that 2nd channel and close this thread here. BR Alex

Hi, I am assuming that you use the DLM tools in e2studio for this, correct? In general, it should work with any current J-Link model. Can you please tell us what J-Link Commander outputs at “Firmware: xxx” for your J-Link BASE? Just to make sure…

Hi, You might link the RTT control block & buffers to a fixed location, which is identicial in the BTL and APP. Furthermore, the RTT control block & buffers should be marked as “do not initialize” in the APP part (e.g. by placing them in zhe…

Hi, In the list you have sent a link to, none of the devices are supported by J-Link. J-Link supports debugging on the MSP0 and MSP432 derivatives (Cortex-M based) The “legacy” MSP430 are only supported by Flasher for production programming. No…

Sounds like it has to do with the “working directory” (en.m.wikipedia.org/wiki/Working_directory) When you click the bat file, the working directory of the bat file code is the location of thw bat file. That working directory is inherited by JLink.exe,…

Sorry for the delay in response. We have no intentions to remove the open flash loader (OFL) support. We also do and will continue to support CMSIS algorithms, as stated here: wiki.segger.com/J-Link_Device_Support_Kit#DSK_availability (The SEGGER flash…

Hi, Sure you can connect 5x Flasher Compact using a standard USB hub. Here you can find an example to program multiple targets in parallel: wiki.segger.com/UM08003_JFlash…tiple_targets_in_parallel

Hi, to 1) See here: segger.com/products/debug-prob…#technical-specifications and look for VIF. 1.2 - 5V are fine for VIF (VTref) to 2) While it is a bit unusual to shared TRACED0 with SWV because SWV is usually shared with TDO, I can see why SiLabs did…