SEGGER - Alex Administrator

Hi, Sure you can connect 5x Flasher Compact using a standard USB hub. Here you can find an example to program multiple targets in parallel: wiki.segger.com/UM08003_JFlash…tiple_targets_in_parallel

Hi, to 1) See here: segger.com/products/debug-prob…#technical-specifications and look for VIF. 1.2 - 5V are fine for VIF (VTref) to 2) While it is a bit unusual to shared TRACED0 with SWV because SWV is usually shared with TDO, I can see why SiLabs did…

Can you please PM me the S/N of your J-Trace unit?

Not being able to specify the SWO speed is bad… Having it on “max possible” is OK but not being able to change that setting is a bad thing because different models have different max. speeds May be worth opening a ticket at Renesas for this because it…

Hi Steven, I see that you have been in touch with Richard W. at TI. A very capable guy… Pretty sure he can help you out. As J-Link’s Cortex-M4 support is generally working and we are not talking about an issue with our flash algo etc. but a connect…

I doubt that it is a problem with the ULTRA+ firmware but more a setup issue. Probably you have set the SWO speed to “max” and the ULTRA+ (which is capable to handle up to 100 MHz SWO speeds) leads to settings that exceed the max. speed of the…

Hi Pedro, What unit do you use? (Can you please PM me the S/N?) There is currently no official way to do this via J-Link Commander but we should be able to add something like that. Way easier than adding a whole command line handling to a heavy, almost…

Hi Steve, Sounds a bit like the M4 is clocked, so the AHB-AP debug domain is accessible but the core itself is still held in reset. This would explain why it is not responding to halt requests etc. Is that possible in your case?

Hi, There is no RTT support for ARM11, as ARM11 does not support background memory access. The “emulation mode” is also not available for ARM11

That’s not how J-Link is intended to work. Nope, there is no possibility doing what you plan to do, with the available script etc. APIs. We strongly recommend to not further pursue this path but select the correct device in the IDE.