SEGGER - Alex Administrator
- Member since Dec 18th 2007
- Last Activity
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
SEGGER - Alex -
Replied to the thread Msp430F21xx family support.
PostHi, In the list you have sent a link to, none of the devices are supported by J-Link. J-Link supports debugging on the MSP0 and MSP432 derivatives (Cortex-M based) The “legacy” MSP430 are only supported by Flasher for production programming. No… -
SEGGER - Alex -
Replied to the thread Running JLink through batch file does not work through LabVIEW.
PostSounds like it has to do with the “working directory” (en.m.wikipedia.org/wiki/Working_directory) When you click the bat file, the working directory of the bat file code is the location of thw bat file. That working directory is inherited by JLink.exe,… -
SEGGER - Alex -
Replied to the thread Creating user flash algorithm options.
PostSorry for the delay in response. We have no intentions to remove the open flash loader (OFL) support. We also do and will continue to support CMSIS algorithms, as stated here: wiki.segger.com/J-Link_Device_Support_Kit#DSK_availability (The SEGGER flash… -
SEGGER - Alex -
Replied to the thread Multiple programming IC RSL-10 from On semi.
PostHi, Sure you can connect 5x Flasher Compact using a standard USB hub. Here you can find an example to program multiple targets in parallel: wiki.segger.com/UM08003_JFlash…tiple_targets_in_parallel -
SEGGER - Alex -
Replied to the thread Debug+trace connector for SiLabs EFR32BG22.
PostHi, to 1) See here: segger.com/products/debug-prob…#technical-specifications and look for VIF. 1.2 - 5V are fine for VIF (VTref) to 2) While it is a bit unusual to shared TRACED0 with SWV because SWV is usually shared with TDO, I can see why SiLabs did… -
SEGGER - Alex -
Replied to the thread [SOLVED] J-Trace Pro not functioning correctly over USB.
PostCan you please PM me the S/N of your J-Trace unit? -
SEGGER - Alex -
Replied to the thread [SOLVED] SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) in Renesas demoboard doesn't work using Jlink Ultra+ and instead works with J-Link OB-S124 embedded in demoboard.
PostNot being able to specify the SWO speed is bad… Having it on “max possible” is OK but not being able to change that setting is a bad thing because different models have different max. speeds May be worth opening a ticket at Renesas for this because it… -
SEGGER - Alex -
Replied to the thread Can not halt m4 on AM572x evaluation module by JTrace..
PostHi Steven, I see that you have been in touch with Richard W. at TI. A very capable guy… Pretty sure he can help you out. As J-Link’s Cortex-M4 support is generally working and we are not talking about an issue with our flash algo etc. but a connect… -
SEGGER - Alex -
Replied to the thread [SOLVED] SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) in Renesas demoboard doesn't work using Jlink Ultra+ and instead works with J-Link OB-S124 embedded in demoboard.
PostI doubt that it is a problem with the ULTRA+ firmware but more a setup issue. Probably you have set the SWO speed to “max” and the ULTRA+ (which is capable to handle up to 100 MHz SWO speeds) leads to settings that exceed the max. speed of the… -
SEGGER - Alex -
Replied to the thread J-Link Boot Mode Switching.
PostHi Pedro, What unit do you use? (Can you please PM me the S/N?) There is currently no official way to do this via J-Link Commander but we should be able to add something like that. Way easier than adding a whole command line handling to a heavy, almost… -
SEGGER - Alex -
Replied to the thread Can not halt m4 on AM572x evaluation module by JTrace..
PostHi Steve, Sounds a bit like the M4 is clocked, so the AHB-AP debug domain is accessible but the core itself is still held in reset. This would explain why it is not responding to halt requests etc. Is that possible in your case? -
SEGGER - Alex -
Replied to the thread [SOLVED] RTT on ARM1176?.
PostHi, There is no RTT support for ARM11, as ARM11 does not support background memory access. The “emulation mode” is also not available for ARM11