botched22 Community Member
- Member since Jun 21st 2024
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
botched22 -
Replied to the thread Debug+trace connector for SiLabs EFR32BG22.
PostI can confirm the connector shown above worked for us on the BG22. You have to slow HCLK down by a factor of 8x to allow ETM enough time to keep up with the data rate from the trace. I did that with this line: Source Code (4 lines) -
botched22 -
Replied to the thread Debug+trace connector for SiLabs EFR32BG22.
PostAlex, Thanks for your quick reply. As far as I know, there is only either the 20 MHz RC oscillator running or the 39 MHz crystal running. We are not using any special clocking like the clock multiplier or divider, one of those frequencies are the main… -
botched22 -
Posted the thread Debug+trace connector for SiLabs EFR32BG22.
ThreadHello, I am trying to build the 19 pin debug+trace connector for a Silicon Labs EFR32BG22.Here is the link to the reference manual for that part: silabs.com/documents/public/re…-manuals/efr32xg22-rm.pdf (Please do not think I expect you to read this,…