Steve Sun Community Member
- Member since May 17th 2024
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
Steve Sun -
Replied to the thread Can not halt m4 on AM572x evaluation module by JTrace..
PostHi, Alex Thanks very much. I will try my best to understand what you are saying and try again. Best regards, Steve Sun -
Steve Sun -
Replied to the thread Can not halt m4 on AM572x evaluation module by JTrace..
PostHi, Alex Thanks very much. It seems that what you said makes sense, but I'm NOT sure. What is your suggestion? I can try on my board. My board is a official board, AM572x evaluation module. ti.com/tool/TMDSEVM572X My JTrace is a official genuine… -
Steve Sun -
Replied to the thread Can not halt m4 on AM572x evaluation module by JTrace..
PostConnecting to target via cJTAG InitTarget() start TI AM572x (Cortex-M4_0 core) J-Link script J-Link script: Init ICEPick TotalIRLen = 6, IRPrint = 0x01 InitTarget() end - Took 96.1ms TotalIRLen = 10, IRPrint = 0x0011 JTAG chain detection found 2… -
Steve Sun -
Posted the thread Can not halt m4 on AM572x evaluation module by JTrace..
ThreadHi, I have a AM572x evaluation module and a jtrace. I can debug A15 correctlly, but I can not debug M4. I can connect M4, but can not halt. I ask this question on TI's forum, but not resolved. e2e.ti.com/support/processors-…=%20user%3A606064#5199757 I…