pbizzarri Community Member
- Member since May 16th 2024
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
pbizzarri -
Replied to the thread Enable SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) with Jlink Ultra+ causes debugger disconnection and microcontroller in stuck (power cycle is necessary for recovery).
PostGoodmorning I also open a ticket. -
pbizzarri -
Replied to the thread Enable SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) with Jlink Ultra+ causes debugger disconnection and microcontroller in stuck (power cycle is necessary for recovery).
PostHi Alex, thanks for reply. please take in account this thread: [SOLVED] SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) in Renesas demoboard doesn't work using Jlink Ultra+ and instead works with J-Link OB-S124 embedded in demoboard… -
pbizzarri -
Replied to the thread [SOLVED] API OS_InInterrupt() doesn't work if called inside function called by OS SW timer.
PostHi, thanks for quick reply Your explanation is very clear, and also help us in undertstanding better where OS timer SW are called ("Cortex-M embOS software timers are executed within the PendSV()") Your workaround seems works fine in my tests. I… -
pbizzarri -
Replied to the thread Enable SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) with Jlink Ultra+ causes debugger disconnection and microcontroller in stuck (power cycle is necessary for recovery).
PostHi Alex Any updates from the log posted? do you think i have to create an issue ticket for this? Thanks in advance -
pbizzarri -
Posted the thread [SOLVED] API OS_InInterrupt() doesn't work if called inside function called by OS SW timer.
ThreadWe are using OS version: V5.18.0.3 We have a function that uses mutex, and it is used inside tasks and in ISR function. In order to avoid OS error, mutex usage is under condition, checking if caller is in task execution or in ISR exection, using API… -
pbizzarri -
Replied to the thread Enable SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) with Jlink Ultra+ causes debugger disconnection and microcontroller in stuck (power cycle is necessary for recovery).
PostHi Alex Thanks for reply Attached full logs as you requested -
pbizzarri -
Replied to the thread [SOLVED] SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) in Renesas demoboard doesn't work using Jlink Ultra+ and instead works with J-Link OB-S124 embedded in demoboard.
PostHi Alex. You are right! I used J-Link Configurator to set max SWO speed to 1MHz, and with the same scenario i saw from jlink log that now TPIU_ACPR is set to 99 (so clock prescaler 100, so from 100MHz SWO pin clock is 1MHz) and now it works!! So, my… -
pbizzarri -
Replied to the thread [SOLVED] SWO during Debugging Microcontroller Renesas RA6M5 (R7FA6M5BH) in Renesas demoboard doesn't work using Jlink Ultra+ and instead works with J-Link OB-S124 embedded in demoboard.
PostHi Alex, thanks for reply As i said in my post, i cannot perform the same test using segger ozone due another issue (posted) Instead i did my test using renesas e2studio (eclipse based) where i have limited config options for jlink debugger I followed… -
pbizzarri -
ThreadI'm using a Renesas demobaord with RA6M5 (R7FA6M5BH) microcontroller and e2studio IDE-Debugger (eclipse based) I configured debugging with jlink over SWD and enabled SWO for printf debug using ITM (SWO) Debugging with an external Jlink Ultra+ (version… -
pbizzarri -
ThreadI'm trying to use printf over ITM channel (SWO) with microcontroller Renesas RA6M5 (R7FA6M5BH) I'm using ozone (version 3.34) and my JLINK Ultra+ with JLINK updated to version 7.96H Ozone project is well configured for SWD and SWO (see attached ozone…