SEGGER - AlexD Administrator

Hi Vlad, we are able to reproduce the issue. A fix will be provided in a future Ozone release. Thanks for notifying us! Best regards -- AlexD

Hi, thank you for providing the details. It appears to be the case that Ozone somehow swallows the upper 32 bits of the registers D16..D31. We will need to have a closer look for reproducing the issue locally. Best regards -- AlexD

Hi Namklak, please use the he context menu of the terminal window for deselect the respective options and close the terminal window. Further details can be found in the description of the terminal window in the Ozone user's manual. Best regards -- AlexD

Hi Vlad, thanks for letting us know. We are not aware of such an issue. Which SVD file are you using? Is it `Cortex-A7.svd` that is coming with Ozone? Are you able to reproduce the issue on an eval board? If so: which one? Could you please provide a…

Hi AndyR, on which device, exactly do you observe that behavior? We shall try to reproduce locally. Best regards -- AlexD

H Namklak, Ozone does not support sending such control characters to the target. Best regards -- AlexD

Hi AndyR, could you please provide a J-Link log and an Ozone log, both recorded during the same session where the issue is reproduced? How to create an Ozone log is described in chapter 8 of the Ozone user's manual. Creating a J-Link log file is…

Hi AndyR, please refer to the Ozone user' manual, section 4.6.1, where the hardware requirements for the data sampling window are listed. There you can see that you can control background memory access emulation via the system variable…

Hi fraengers, thank you. We will try to reproduce and come back to you. This might take a while since all engineers are currently fully booked. Best regards -- AlexD

Hi AndyR, I'm sorry but I am not able to comprehend the point of your inquiry. Could you please describe more clearly what exactly you would like to know or understand? Best regards -- AlexD

Hi Hi Charles_1, good to see you are up and running again. We will consider this thread as closed now. Thanks for sharing this with us and best regards -- AlexD

Hi fraengers, we were able to reproduce the issues from bullet point #1 and #2. We will provide fixes in a future release of Ozone. Best regards -- AlexD

Hi Charles_1 your inquiry is no longer Ozone specific. You are facing general connection issues, which cannot be handled by Ozone team but need to be handled by the J-Link team. If my understanding is correct, you are now able to attach to your device.…