SEGGER - AlexD Administrator
- Member since Jan 12th 2021
- Last Activity
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
SEGGER - AlexD -
Replied to the thread Debugging STM32H745.
PostHi Fraengers, those questions are related to J-Link, not Ozone. Therefore I move this thread to the J-Link forum. Best regards -- AlexD -
SEGGER - AlexD -
Replied to the thread Ozone Silicon Labs SiWx917Y (Cortex-M4) support.
PostHi, please raise a ticket in our support ticket system. The link can be found in my signature below. Best regards -- AlexD -
SEGGER - AlexD -
Replied to the thread Reloading and programming in the background.
PostHi rals, what about writing a little script that does the flashing by means of the tooling you received with your J-Link/J-Trace and invoke that script from within your IDE? Assuming your IDE supports customizable buttons you the flashing will be… -
SEGGER - AlexD -
Replied to the thread Ozone terminal unable to send CRLF.
PostHi SyamK, Which Semihosting service do you use? I assume, this is ReadC(). Is that correct? ReadC() returns a character. If you configure Ozone such that a dialog opens to enter a character, you need to enter a character and then click on the "OK"… -
SEGGER - AlexD -
Replied to the thread Reloading and programming in the background.
PostHi Rune, Ozone does not provide such a functionality and we do not see a big benefit in implementing such a feature. Ozone is a debugger and if you switch to Ozone it can be assumed that you intend debugging the firmware. For that use case Ozone behaves… -
SEGGER - AlexD -
Replied to the thread FreeRTOS aware plugin for Cortex-M33 (CM33).
PostHi Sam, the FreeRTOS plugin for Cortex M33 was not tested on the Cortex M4. So we cannot promise that everything will work as expected and intended. But feel free to share your experience here. Best regards -- AlexD