New
Hi,
We're using the ST Secure Manager on a board with the STM32H573 micro.
Without the Secure Manager installed on the board, we can use the j-link & IAR to download & debug without any problem.
However, once we install the Secure Manager onto the processor, we can no longer download the non-secure application (even though the processor is still set to TK-Closed state, so we should have debug access to the non-secure application area).
We can still use an ST-Link when the Secure Manager is installed so we're wondering if there is a list of things we can check to see what we've not set correctly.
The attempt to download the new non-secure application appears to be continually attempting to download the same flash sector repeatedly and never moves on to the next Flash sector.
Thanks!
We're using the ST Secure Manager on a board with the STM32H573 micro.
Without the Secure Manager installed on the board, we can use the j-link & IAR to download & debug without any problem.
However, once we install the Secure Manager onto the processor, we can no longer download the non-secure application (even though the processor is still set to TK-Closed state, so we should have debug access to the non-secure application area).
We can still use an ST-Link when the Secure Manager is installed so we're wondering if there is a list of things we can check to see what we've not set correctly.
The attempt to download the new non-secure application appears to be continually attempting to download the same flash sector repeatedly and never moves on to the next Flash sector.
Thanks!