Initialization emWin for board: LPC2478, LCD PH320240T-006, SDRAM MT48LC2M32B2 memory 8MB, FLASH M29W320DB memory 4MB?

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Initialization emWin for board: LPC2478, LCD PH320240T-006, SDRAM MT48LC2M32B2 memory 8MB, FLASH M29W320DB memory 4MB?

    Please, help run emWin on the board TE-ULCD35 (LPC2478, LCD PH320240T-006, SDRAM MT48LC2M32B2 memory 8MB, FLASH M29W320DB memory 4MB). It seems that the difficulties with the initialization of hardware.

  • Launched manually initialize LCD, the result is an attachment. Any changes to the display settings, the picture does not change. Is this problem in the configuration of LCD or SDRAM?
    Images

    • IMAG0482-1.jpg

      745.54 kB, 2,071×1,504, viewed 805 times

  • Hello EAV,

    Is there a chance to get detailed information about what was done so far? I am afraid I am not able to tell what goes wrong by having a look at the screenshot.

    I recommend setting up the display driver as it is described in the chapter "Display drivers" in the emWin documentation.

    If you have further questions, please let me know.

    Best regards,
    Adrian