[ABANDONED] Data Graph display issue after load snapshot

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] Data Graph display issue after load snapshot

    Hi,

    to reproduce the issue；
    1, download the attached file and unzip
    2, put DataGraph.axf into C:/
    3, open DataGraph.jdebug using ozone
    4, download and run, capture data for more than 180s and pause the program, save snapshot
    5, load the saved snapshot
    6, change the time-scale of timeline window form 1s to 2s or 5s, data graph display corruption should be seen.

    tools:
    jlink ultra v4, ozone 3.36, stm32f103 eval board.

    DataGraph.zip


  • Hi,

    We tried to reproduce the issue using V3.38, but everything seems to work correctly. After the snapshot has been loaded the timeline window looks as expected, even after changing the time-scale.
    The "corruption" may be seen shortly while the snapshot is being loaded and the time-scale is at 2 or 5 seconds Otherwise it cannot be observed on my end.

    Could you check whether the issue still appears with V3.38?
    Can the corruption be observed even after the snapshot has finished loading?
    If yes, could you provide us with this snapshot?

    Please note that bumping threads without added information is against forum rules. This is not a support forum but a community forum, there is no guarantee that you will receive an answer.
    For more information see my signature.

    Kind regards,
    SebastianB
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.