Cannot get jlink plus compact working with a pinetime board

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Cannot get jlink plus compact working with a pinetime board

    I have a PineTime development kit which is a nRF52 chip. I can connect to it with a ST-Link using OpenOCD but not my JLink Plus Compact. I get the following message:

    LOG: J-Link RTT Viewer V7.80c: Logging started.
    LOG: Terminal 0 added.
    LOG: Connecting to J-Link via USB...
    LOG: Device "NRF52" selected.
    ERROR: Could not connect to target device.

    I am using the following connections:
    [img]https://cdn.discordapp.com/attachments/622348681538043924/1258875347647336531/Bd0jhdh5VHIOAAAAAElFTkSuQmCC.png?ex=668a4b47&is=6688f9c7&hm=f8d2a280118a00a3f3fc939b5c2d2595d3d5b47adb71e81bdd754d6150c0d52e&[/img]

    Which are supported by the PineTime Wiki Reprogramming the PineTime - PINE64:
    [img]https://cdn.discordapp.com/attachments/622348681538043924/1258876974844088340/image.png?ex=668a4ccb&is=6688fb4b&hm=a1fff8f34b86dfbc2a4c5f3d5d84b88bf2e67ce612b7407530f1b8b65b65ca59&=[/img]

  • Hello,

    You seem to be using a version which is not up to date. Does the issue also occur with the current release version?
    https://www.segger.com/downloads/jlink

    Could you please send us a J-Link log file of the failing scenario?
    How to enable: wiki.segger.com/J-Link_DLL#Enable_J-Link_Log_File

    Best regards,
    Simon
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.