why jlink gdb server reponse "Unsupported CPU"?

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • why jlink gdb server reponse "Unsupported CPU"?

      JLinkARM.dll V7.96f (DLL compiled Apr 24 2024 14:25:37)

      Command line: -device Cortex-A55 -if SWD -JLinkScriptFile /home/geduer/wor/jlinkscript.txt -port 5088
      -----GDB Server start settings-----
      GDBInit file: none
      GDB Server Listening port: 5088
      SWO raw output listening port: 2332
      Terminal I/O port: 2333
      Accept remote connection: yes
      Generate logfile: off
      Verify download: off
      Init regs on start: off
      Silent mode: off
      Single run mode: off
      Target connection timeout: 0 ms
      ------J-Link related settings------
      J-Link Host interface: USB
      J-Link script: /home/geduer/wor/jlinkscript.txt
      J-Link settings file: none
      ------Target related settings------
      Target device: Cortex-A55
      Target device parameters: none
      Target interface: SWD
      Target interface speed: 4000kHz
      Target endian: little

      Received monitor command: regs
      Unsupported CPU!

    • New

      Hello,

      The regs command is only supported for the ARMv8 AArch32 architecture.

      Since the Cortex-A55 is ARMv8 AArch64, GDB responds with "unsupported CPU."

      Best regards,
      Simon
      Please read the forum rules before posting.

      Keep in mind, this is *not* a support forum.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/
      Or you can contact us via e-mail.