Hi, this is basicly the same problem that was seen and solved in [SOLVED] Ozone Power Graph - start/stop recording when debugging
I am using the Segger Trace Pro Cortex-M with the STM32H7 Segger demo board with the demo project for that board loaded into Ozone. When recording power at 200kHz, the power recording does not stop when hitting a breakpoint, it just continous until I set the sampling frequency to Off.
Latest software version of Ozone (downloaded 2024-march-20), and the latest software in the trace unit as it updated itself with the J-link commander. The board is powered through the smaller trace connector as in the description on the wiki.
This is the first time I try this so I might do something wrong, but would appreciate any help.
Maybe a related or unrelated issue is that I doesn't really see all trace data plotted in Power Graph, just maybe the latest 6-10 blink changes closest to the stop, until i hit paus or a breakpoint is set during runtime and hit. How long time should I expect the trace buffer to last with this setup with an 8Gb buffer setting? or is this the setting for the power recording buffer only?
Regards, Anders H.
I am using the Segger Trace Pro Cortex-M with the STM32H7 Segger demo board with the demo project for that board loaded into Ozone. When recording power at 200kHz, the power recording does not stop when hitting a breakpoint, it just continous until I set the sampling frequency to Off.
Latest software version of Ozone (downloaded 2024-march-20), and the latest software in the trace unit as it updated itself with the J-link commander. The board is powered through the smaller trace connector as in the description on the wiki.
This is the first time I try this so I might do something wrong, but would appreciate any help.
Maybe a related or unrelated issue is that I doesn't really see all trace data plotted in Power Graph, just maybe the latest 6-10 blink changes closest to the stop, until i hit paus or a breakpoint is set during runtime and hit. How long time should I expect the trace buffer to last with this setup with an 8Gb buffer setting? or is this the setting for the power recording buffer only?
Regards, Anders H.