Test Automation and GUI-Server Issue

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Test Automation and GUI-Server Issue

    we have basically same commandline for two different controllers: psoc and MKV5x

    Commandline:
    $(flash_jlink_exe) -CommandFile $(flash_jlink_path_set) -Log $(flash_jlink_log)

    you can find commandfile and output in the attachments.

    The Problem is, that mkv5x is not flashed, instead it keeps hanging at the gui-server...
    even more problematic is, that no pop up or whatever shows up...

    same for jlink 7.64 and 7.90

    But for 7.90 there is one difference, the command-sqeuence about gui-server is processed earlier and process stucks while connecting the device.
    Files

    • output.zip

      (53.87 kB, downloaded 143 times, last: )

    • log_7_90.txt

      (7.69 kB, downloaded 104 times, last: )

    The post was edited 2 times, last by n.ehrhardt88 ().

  • Hi,

    Does the latest version still show these effects?
    V7.90 is from August 2023 (while we are currently in Feb 2024) and there have been several updates since then.

    segger.com/downloads/jlink/


    BR
    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.