[SOLVED] [ RTT ] Sending data to Target using RTT

AbhiAsh · Jan 11th 2024, 2:17pm

Hello,

I need to send strings of data from a text file to the target controller via RTT.
The RTT Viewer gives only a command line option.
My requirement is to open a text file and send the data line by line to the target in handshake.

Any ideas how this can be achieved ?

Thanks,
Best Regards,
AbhiAsh

AbhiAsh · Jan 15th 2024, 5:17am

Can Jlink Script be used for sending data to the target using RTT ?
Is there any example available ?

SEGGER - Fabian · Jan 15th 2024, 8:32am

Hi AbhiAsh,

AbhiAsh wrote:

My requirement is to open a text file and send the data line by line to the target in handshake.

We do not have a tool or example with such a feature directly.
However, you could do one of the following:
1) Acquire the J-Link SDK & use e.g. C/C++ or python to read the file contents and send it to the target line by line.
The SDK comes with RTT samples in C & python.
segger.com/products/debug-probes/j-link/tools/j-link-sdk/
2) Read the file content & send it line by line to the RTT Telnet channel:
wiki.segger.com/J-Link_RTT_TELNET_Channel
3) Read the data file & send it line by line vie StdIn of J-Link RTT Client:
wiki.segger.com/J-Link_RTT_Client

Best regards,
Fabian

[SOLVED] [ RTT ] Sending data to Target using RTT

[SOLVED] [ RTT ] Sending data to Target using RTT

AbhiAsh wrote:

Share

Tags