[SOLVED] [Repost] Flashing Segger OB devkit from a browser using WebUSB or Web Serial

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] [Repost] Flashing Segger OB devkit from a browser using WebUSB or Web Serial

    Reposting as my previous post was mark "abandoned" for some unknown reason.

    Original post on the Nordic site: devzone.nordicsemi.com/f/nordi…sing-web-usb-or-webserial

    Hello! I'm interesting in developing a tool for a client that would allow them to flash a devkit with Segger OB like the Nordic nRF9160 DK from their browser. The common way this is achieved is a Chrome/Chromium browser and either WebUSB or Web Serial. I was looking into this Web USB example on the wiki and since the DK has a Segger OB chip, I was wondering if it was possible to use a library from Segger and/or Nordic to assist in the flashing process. You can see example of such a tool from another vendor here. Thanks!
  • Hi Jonathan,

    As you also contacted us per e-mail, we will follow-up on the e-mail channel.


    BR
    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.