Appwizard

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Appwizard

      Hello Team SEGGER

      Can the Appwizard version downloaded from the NXP site be used with the corresponding NXP emWin libraries on a custom board using an NXP MCU? Are there any limitations to using this Appwizard version? Is it a trial version? And how might I go in order to add the UI generated by Appwizard to my custom project? I have already configured emWin to run on the custom hardware with a SSD1963 based display.


      Awaiting your reply.

      Thanks.

    • Hi,

      You can use any AppWizard version which matches your emWin version. I'd use the NXP rather than the one from our website (trial). The one from NXP should match the emWin version and shouldn't bother you with any licensing information.

      If you are using an emWin version which is not supported by the AppWizard provided by NXP you can use the one from our website.

      Here is a description how to check for the proper version:
      segger.com/doc/UM03003_AppWizard.html#AppWizard_version

      Regards,
      Sven
      Please read the forum rules before posting.

      Keep in mind, this is *not* a support forum.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/
      Or you can contact us via e-mail.