[ABANDONED] SES RTOS Awareness thread work not right

elmagnificose · Dec 7th 2023, 9:35am

SES RTOS Awareness thread not right

I use Ozone coulud show 47 task

but SES could only show 27 task and i also set the limit from 25 to 64 and enable RTOS Awareness with FreeRTOS CortexM7

I think it's a bug.

SEGGER - Nino · Dec 21st 2023, 11:17am

Hello,

Thank you for your inquiry.
Such an issue is not known to us.

It seems though that ES is shipping with older variants of the RTOS awareness scripts.

Could you try to load the Ozone RTOS awareness script in ES?
Does it work better now?

Best regards,
Nino

elmagnificose · Dec 22nd 2023, 5:45am

SEGGER - Nino wrote:

Hello,

Thank you for your inquiry.
Such an issue is not known to us.

It seems though that ES is shipping with older variants of the RTOS awareness scripts.

Could you try to load the Ozone RTOS awareness script in ES?
Does it work better now?

Best regards,
Nino

open with Ozone or SES ,the default script always M4 not M7, all config is M7 that i checked

i have check the jdebug file , the file write it "M4"

elmagnificose · Dec 22nd 2023, 5:47am

SEGGER - Nino wrote:

Hello,

Thank you for your inquiry.
Such an issue is not known to us.

It seems though that ES is shipping with older variants of the RTOS awareness scripts.

Could you try to load the Ozone RTOS awareness script in ES?
Does it work better now?

Best regards,
Nino

you could create a new STM32H7 project in SES or Ozone, it will show the same M4 script result and the SES bug could be reproduced

SEGGER - Nino · Dec 22nd 2023, 9:54am

Hello,

Not sure I understand.
Did you now try the M7 Ozone script in ES or not? Does it work better or not?

ES will not set the script automatically. So if you have selected the wrong M4 script that is user error. You have to select the M7 script of course if you are using a Cortex-M7.

Best regards,
Nino

elmagnificose · Dec 22nd 2023, 1:20pm

I set the M7 script but no better, ES also lost some task info

Share