Hi!

According to the change notes of v7.88j
"Renesas RA family: Added support for protection unlock via ALeRASE code"
this feature is expected to work now, but it "does not" - full-featured as I had expected......

(I tried this code F0000000000000000000000000000000 flashed at 0x1010018 - this protects the code - but J-Flash fails to (re-)connect with this code. The known ALeRASE-Skript works - it disables the protection and erases the flash.)


With ID Code FFFFFFFFFFFFFFFFFF45534152654C41 entered (which is the ALeRASE-Code in HEX. NOT 414C6552415345FFFFFFFFFFFFFFFFFF) it works directly in J-Flash and J-Flash Lite now: J-Flash triggers ERASE ALL, so read back values are in erased state and that is what is written in the change note: unlock via ALeRASE code (so unlock AND erase...)


But that does not mean, that "ID Code Verification" works with different IDs. The ALeRASE value deletes all, but all other ID codes used and entered do not unlock the protection yet (intended WITHOUT erasing).

Is this planned for a future release?


Best regards,

HaJo

Hi!

That does not work and I do not understand the corresponding ID code above.


After flashing 84848484848484848484848484848484

:020000040101F8
:100018008484848484848484848484848484848498
:00000001FF

I expect to be able to connect with this code entered in ID Code dialog.
ALeRASE works.


Best regards,

HaJo