[SOLVED] Ozone memory window address field missing

hugo habicht · Apr 13th 2023, 5:57pm

Hello,

the address entry field in my memory window seems gone missing (see screen shot attached).
I have not used that for a good while but I am pretty certain it was there at some stage.

Does anybody have an idea what could cause that?
I looked through all the "Preferences" but could not find anything.
What am I missing?

Kind Regards,
Hugo

hugo habicht · Apr 13th 2023, 6:06pm

I changed all the toolbar options in the xxx.jdebug.user file to 1 but that did not make a difference.
I could change the address in the same file though, so at least I can kindof use it now.

hugo habicht · Apr 13th 2023, 6:59pm

Ok, found it.
Right click in the memory area and then the toolbar can be enabled.
Weird though that that setting is not in the .user setting file.

SEGGER - AlexD · Apr 14th 2023, 11:46am

Hi Hugo,

Good to see that you're up and running again.

this is actually documented in the user's manual, admittedly not too clearly. The option is described in the section for the memory window's context menu. We'll add a note to the section describing the toolbar.

Best regards
-- AlexD

Share