[SOLVED] Nordic Development SES License for build using emBuild on build server

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Nordic Development SES License for build using emBuild on build server

    We are trying to build our nordic nrf5 sdk project using SES emBuild tool on a build server. We have been able to install all the required tools including Segger embedded studio. We are able to build our project, and now looking into license setup.
    The documentation constains information about emLicense tool which we plan to use to activate SES installation on build server.
    But the registration page for license for nordic development requires MAC address. Is there any way around this? Since mac address of the build server is usually not available to users.

    Otherwise, if we do a new installation of segger everytime we run the build on server, would it create a licensing issue?

  • Hello,

    Thank you for your inquiry.
    No there is no way around the MAC address if you plan on using the free Nordic license. But you can of course generate as many licenses as you want.

    If you have a build system that e.g. does not have a fixed MAC address we recommend to purchase a so called "Automated Environment License".
    segger.com/purchase/licensing/license-cul/

    For a quote feel free to contact our sales:
    segger.com/purchase/request-quote/


    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.