Hi Segger team,

I saw from the page(segger.com/supported-devices/jlink/nxp/s32k3) Jlink already support S32K3 multicore series S32K324. But failed to debug with S32DS. Core 0 can be debugged, but core 1 can't be attached. Do you know the reason?
Core 1 code address should be after 0x600000 but it never get there.



Also attached some of the Jlink setting.





There is no problem using Jlink+S32DS3.4.3 for single and lockstep core debugging. S32K312/S32K314/S32K344.



Best regards,
Jeremy
Jeremy.he@nxp.com