[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

    Hi Segger team,

    I saw from the page(segger.com/supported-devices/jlink/nxp/s32k3) Jlink already support S32K3 multicore series S32K324. But failed to debug with S32DS. Core 0 can be debugged, but core 1 can't be attached. Do you know the reason?
    Core 1 code address should be after 0x600000 but it never get there.



    Also attached some of the Jlink setting.





    There is no problem using Jlink+S32DS3.4.3 for single and lockstep core debugging. S32K312/S32K314/S32K344.



    Best regards,
    Jeremy
    Jeremy.he@nxp.com
    Images

    • Jlink+S32DS running.JPG

      220.61 kB, 1,384×1,003, viewed 317 times

    • Jlink setting 2.JPG

      89.6 kB, 641×804, viewed 271 times

    • JLINK SETTING1.png

      47.03 kB, 644×706, viewed 270 times

    • Jlink support S32K324.png

      120.99 kB, 1,551×945, viewed 278 times