Hello!
I have j-link device:
HW: V9.60
dll: V7.66g
FW: J-Link V9 compiled May 7 2021
I'm trying to connect to the CC2652RB chip:
Display All
Does J-link support CC2652RB? Where could be the problem?
Thanks
I have j-link device:
HW: V9.60
dll: V7.66g
FW: J-Link V9 compiled May 7 2021
I'm trying to connect to the CC2652RB chip:
Source Code
- Tools.Preferences();
- Window.Show ("J-Link Control Panel");
- Tools.Preferences();
- Tools.JLinkSettings();
- Project.SetTargetIF ("cJTAG");
- Project.SetTIFSpeed ("1 MHz");
- Debug.SetConnectMode (CM_ATTACH_HALT);
- Debug.Start();
- Device "CC2652RB" selected.
- Debugger tries to select target interface cJTAG.
- This interface is not supported by the connected emulator.
- Selection will be ignored by the DLL.
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- Connect failed. Resetting via Reset pin and trying again.
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- InitTarget(): PCode returned with error code -1
- This interface is not supported by the connected emulator.
- Selection will be ignored by the DLL.
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- Connect failed. Resetting via Reset pin and trying again.
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- InitTarget(): PCode returned with error code -1
- This interface is not supported by the connected emulator.
- Selection will be ignored by the DLL.
- Connection failed.
Does J-link support CC2652RB? Where could be the problem?
Thanks