Hi

I've added AppWizard created source to an existing base project but it fails at APPW_CreateRoot. Am wondering if you can let me know if this is compatible with my base project?

AW output is attached (simulation folder removed: too big)

Other:

• MDK-Community
  
• FreeRTOS
  
• STemWin532 (used as library from ST, not from within the MDK Environment)
  
• GUIConf allocates 1.5M to emWin
  
• STM32F429 + LTDC M565 - 320 x 240
  
• GUIConf is called from my GUI_Init
  
• emWin runs fine before I get to AW MainTask
  
• FreeRTOS stack on this GUI task is 8k
  

Tried these, all failed:

• remove my call to GUI_Init (in case I am not supposed to call it as AW may do it)
  
• removed all my emWin code between GUI_Init and AW MainTask (in case these affected it even though it was just GUI_Clear and simple stuff)
  
• increased the MainTask stack (no idea what it should be but I went up to 40k)
  

I could not find an ES project to reference, finding only examples for AW not a full project.

If AW is not suitable for non-commercial trial with STemWin then I understand, not a problem. Knowing that would, at least, save me investigating it any more.

Thanks
Mark

Thank you Florian.

I decided it may be best to ask if there is a M4F.lib available? It would save a lot of linking issues as it would directly replace the STemWin build. If not, I understand.

Thank you
Mark

Hi,

I wanted to update that, now, this is possible: the emWin which ships with MDK-Pro now supports AppWizard. Thanks Segger and Keil!

Mark