[SOLVED] STM32G071 debug with CubeIde not resetting

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] STM32G071 debug with CubeIde not resetting

    Hi,

    I'm working on a project with the STM32G071. We have a custom board with this IC and a setup using STM32CubeIDE.

    I can flash the board without any problems and run+debug the code. But If I click the reset button in STM32CubeIDE the target seems to get lost and never enters the main again.
    You can find a log file where I started the session, run into a breakpoint and triggered a reset.

    I have the last version of CubeIDE(V1.9.0) and Segger GDB server (V7.64)

    Thanks!

    Koen
    Files

    • log.txt

      (592.81 kB, downloaded 200 times, last: )

  • Hi Koen,
    Good to hear that the issue could be resolved.

    We will close this thread now.

    BR
    Fabian
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.