[SOLVED] No reaction after selecting Jlink

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] No reaction after selecting Jlink

    Hi expert,
    I am trying systemview3.2 with Jlink plus, but after i select Jlink and click OK, there is no further reaction(normally it should remainder user to select MCU device), the figure is as below.
    per my understanding, though my MCU program is not right, the system view still should display the window to select chip part number.
    I tried version V3.12, it work well, so does it mean the system view have version requirement for the driver in MCU side?
    Images

    • Snipaste_2022-03_20-33-14.png

      460.34 kB, 1,571×762, viewed 439 times

  • Hello,

    Thank you for your inquiry.
    Per default the new SystemView versions will show this pop-up only once on the first SystemView start.
    After that you can find that configuration window under Target->Recorder Configuration.

    Also we recommend to use the latest SystemView version if possible as for older versions no support will be provided.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.