[SOLVED] SystemView via Command Line : How To?

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] SystemView via Command Line : How To?

    I didn't see any threads on this issue.

    The User's Guide indicates that "SystemView can be controlled and configured via command line options" but doesn't provide any examples of how to do so.

    On both MacOS and Windows, trying to use SystemView from the command line just seems to continuously generate errors.

    Does anyone have any working examples of how to use SystemView from the command line?

    Thank you!
    Images

    • Screen Shot 2022-03-31 at 7.16.32 PM.png

      146.81 kB, 1,838×590, viewed 449 times

    • Screen Shot 2022-03-31 at 7.15.03 PM.png

      197.58 kB, 1,898×566, viewed 425 times

  • Hello,

    Thank you for your inquiry.
    How the command line works in SystemView can be found in the SystemView manual in chapter 3.11.
    There you can also find examples.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.