[SOLVED] J-Link and STM32CubeIDE v1.8 (lost functionality)

  • [SOLVED] J-Link and STM32CubeIDE v1.8 (lost functionality)

    Please, help me to fix this problem: when I debugging STM32 MCU with J-Link in STM32CubeIDE v1.8 it is not possible to change the Live Expressions tab values 'on the fly' (while MCU is running). The error message is on the pic.
    A few time ago this working well for me!
    Images

    • STM32CubeIDE issue.jpg

      14.54 kB, 518×200, viewed 273 times

  • Wrong forum.
    More a question for the STM32CubeIDE forum.
    Some of the "upper layers" inside CubeIDE seem to complain about some command not being executable while the CPU is running, so they do not even pass it to the lower levels and finally to GDBServer which is the 1st J-Link involved level.
    It is also possible that it was only working by chance before because the timing inside the IDE was slightly different.
    We did not change the GDB protocol handling here. If a command is passed to GDBServer, it is processed.
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.