Hi All!
I would like to establish connection and Debug an Embedded device (Bosch XDK) via JTAG, but there is a problem with the connection according to J-Link Commander:
Connecting to target via JTAG
InitTarget() start
InitTarget() end
Could not measure total IR len. TDO is constant high.
![](https://forum.segger.com/index.php/Attachment/4910-jtag-PNG/?thumbnail=1&s=d07400ca8fef650477ee1e073e1f78cb6a647f0d)
Please find the log generated here: log.txt
Did anyone else experienced similar problems? Please help me find what is the issue.
Best,
Daniel
I would like to establish connection and Debug an Embedded device (Bosch XDK) via JTAG, but there is a problem with the connection according to J-Link Commander:
Connecting to target via JTAG
InitTarget() start
InitTarget() end
Could not measure total IR len. TDO is constant high.
Please find the log generated here: log.txt
Did anyone else experienced similar problems? Please help me find what is the issue.
Best,
Daniel