My IDE outputs both .elf and .srec files (S1 and S9 format).
Uploading the .elf file works great but uploading the .srec file gives an error:
![](https://forum.segger.com/index.php/Attachment/4717-Segger-error-png/?s=85669e93a1a9be645735d7331b7379252fe5b62d)
With srec_info I checked the entry point:
![](https://forum.segger.com/index.php/Attachment/4718-Segger-entry-png/?s=85669e93a1a9be645735d7331b7379252fe5b62d)
Which does not exactly corresponds with the 0x528 found in the .elf file.
![](https://forum.segger.com/index.php/Attachment/4719-afbeelding-2021-05-06-142950-png/?s=85669e93a1a9be645735d7331b7379252fe5b62d)
Is there a problem with my IDE or with Ozone's s-record parser?
Uploading the .elf file works great but uploading the .srec file gives an error:
With srec_info I checked the entry point:
Which does not exactly corresponds with the 0x528 found in the .elf file.
Is there a problem with my IDE or with Ozone's s-record parser?