[ABANDONED] Minimal JTAG pins

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] Minimal JTAG pins

    we need a minimal number of pins to program the STM32H7xx (ARM M7) using the JTRACE/JLINK probes. I was able to program the processor successfully with just SWDIO, SCLK, GND and VTH (3.3V) connected. I'd like to eliminate the 3.3V to save space, but not sure if there is a way to force the probe to work that way. Is there something in the setup that I can change to make it work?

  • Hi,

    If you can provide your S/N,
    we can tell you if your model supports “fixed VTref” and so can avoid having VTH connected.
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.