[DUPLICATE] Patch issue with FreeRtos and Segger Systemview

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [DUPLICATE] Patch issue with FreeRtos and Segger Systemview

    I am having issue with FreeRtos and Segger SystemView. I am using FreeRtos 10.4.3 and latest target source patch. Anyone help please.
    Images

    • Eclipse IDE.png

      123.59 kB, 1,366×728, viewed 620 times

    • Segger_Systemview_Patch_Issue.png

      77.39 kB, 1,361×702, viewed 666 times

  • Hello,

    as mentioned in many other threads the patch file provided with SystemView works only on FreeRTOS V10.0.0.
    All versions past that are not compatible to each other.
    So you would have to do the instrumentation manually. You can use the patch file for reference.
    The remaining information can be found in the SystemView manual.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.