Adaptive clocking does not work properly

zhongyb · Mar 1st 2008, 8:03am

Hi,

I am trying to use J-Link RDI with LPC2000, but there is an error when using adaptive clocking.

This error is apparent with the latest beta version V379z02, but version V378d works OK.

zhongyb · Mar 5th 2008, 3:02am

Sorry, this bug also exist in the latest beta version V3.79z03, please see attached file for more detailed information.Thanks!

SEGGER - Alex · Mar 6th 2008, 12:32pm

Hello zhongyb,

unfortunately we can not reproduce the problem.
We have tested:
- LPC2378 (MCB2300 Keil Eval board) with IAR 5.11/4.42 and RDI with adaptive clocking
- LPC2129 (MCB2100 Keil Eval board) with Keil uVision 3.20 and RDI with adaptive clocking

In both cases there were no problems when downloading and debugging the program.

In order to analyze this problem, the following information would be useful:
- Information about the hardware and the debugger you used
- Project file
- J-Link logfile
- J-Link RDI logfile

Could you please send an e-mail to support@segger.com with
a detailed description of the problem and the information requested above?

Best regards,

Alex

zhongyb · Mar 7th 2008, 3:13am

OK!
The issue report and detailed information was sent to your support mail box, please note to check. Thanks!

SEGGER - Alex · Mar 14th 2008, 10:35am

We have built a new version of the J-Link ARM
software in which this problem is solved.

The new version (V3.80a) is available for download from our website:
segger.com/download_jlink.html

Best regards,

Alex

Share