Hi All,
I am trying to simulate Rx130 core on IAR Workbench which is having embOs.
When I am trying to force interrupt its not triggering SystTickISR.
When ever I run code in simulator mode , after one time run throught threads its getting stuck at OS_Idle.
Windows 10
Embedded Workbench 7.4
IAR WorkBench for Renesas Rx :- 2.90.1
OS version: 4.24
CODE :-
#pragma vector = IR_CMT0_CMI0
__interrupt void InterruptVector__CMT0(void)
{
OS_EnterNestableInterrupt();
__enable_interrupt();
OS_TICK_Handle();
OS_LeaveNestableInterrupt();
}
in
C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.4\rx\config\debugger\ior5f51306b.ddf
;; Format 1: <id> <type> <vector> <prio> <enable> <request> <destination>
Interrupt1 = IR_CMT0_CMI0 1 28 ICU.IPR[4](CMT0,CMI0) ICU.IER03.IEN4(CMT0,CMI0) ICU.IR[28](CMT0,CMI0)
![](https://forum.segger.com/index.php/Attachment/4177-Capture-PNG/?s=4f2d99f881ef04b3f4861c5f6d7bf14c0824fd19)
Thank you in advance.
I am trying to simulate Rx130 core on IAR Workbench which is having embOs.
When I am trying to force interrupt its not triggering SystTickISR.
When ever I run code in simulator mode , after one time run throught threads its getting stuck at OS_Idle.
Windows 10
Embedded Workbench 7.4
IAR WorkBench for Renesas Rx :- 2.90.1
OS version: 4.24
CODE :-
#pragma vector = IR_CMT0_CMI0
__interrupt void InterruptVector__CMT0(void)
{
OS_EnterNestableInterrupt();
__enable_interrupt();
OS_TICK_Handle();
OS_LeaveNestableInterrupt();
}
in
C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.4\rx\config\debugger\ior5f51306b.ddf
;; Format 1: <id> <type> <vector> <prio> <enable> <request> <destination>
Interrupt1 = IR_CMT0_CMI0 1 28 ICU.IPR[4](CMT0,CMI0) ICU.IER03.IEN4(CMT0,CMI0) ICU.IR[28](CMT0,CMI0)
Thank you in advance.