I'm working on STemWin544 library using the STM32F767ZI-Nucleo and the 3.97inch 16BIT Module OTM8009A display.
Everything works fine with some STemWin examples, but the example
from emWin_Tutorials_SRC DIALOG_MenuStructure.c shows the graphics with the expressions like this:
When setting up a definition like this, #define GUI_SUPPORT_MEMDEV (0) displays graphics without distortion.
I conclude, since the STM32F767ZI-Nucleo has only internal memory,
then #define GUI_SUPPORT_MEMDEV should have a definition of 0
Tell me, am I right or not?
Everything works fine with some STemWin examples, but the example
from emWin_Tutorials_SRC DIALOG_MenuStructure.c shows the graphics with the expressions like this:
When setting up a definition like this, #define GUI_SUPPORT_MEMDEV (0) displays graphics without distortion.
I conclude, since the STM32F767ZI-Nucleo has only internal memory,
then #define GUI_SUPPORT_MEMDEV should have a definition of 0
Tell me, am I right or not?