Was messing with a NUCLEO-F411RE board and decided to convert the onboard STLink to JLink.

Downloaded the file from: segger.com/downloads/jlink/STLinkReflash

When I ran it, observed the following:

1. The included JLinkArm.DLL is really old - version 5.12 (IIRC)
   
   
2. The copyright is old:
   (c) 2016 SEGGER Microcontroller GmbH & Co. KG segger.com
   STLinkReflash compiled Aug 12 2019 10:30:05
   
3. The Firmware Version History at: segger.com/products/debug-prob…j-links/st-link-on-board/ doesn't have an entry for the current version
   

Thanks for creating this replacement code.