[SOLVED] Embedded Studio for RISC-V - additional BSPs

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Embedded Studio for RISC-V - additional BSPs

    Hi,

    Are you planning to supply any additional board support packages for SiFive boards such as the HiFive1 Rev B development kit?

    If this is planned for some time in the future could you give some links as to how to create a new RISC-V BSP from scratch?

    Many thanks,

    Res

  • Hello,

    Thank you for your inquiry.
    Currently there are no plans to add new BSPs to Embedded Studio for RISC-V.
    A BSP is essentially simply a project so feel free to create your own by simply creating a new project for one of the supported RISC-V target devices.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.

  • Hi Res,

    Little update. A guide on how to create your own Embedded Studio packages can be found in the Embedded Studio manual in chapters "Package Generator" and "Package Description file format".
    You can use our online manual for that:
    studio.segger.com/ide_package_description_file_format.htm
    studio.segger.com/mkpkg.htm



    Is that what you were looking for?


    Best regards,

    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.