emWeb General Overview of Process to Create Website

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • emWeb General Overview of Process to Create Website

      New

      Hi
      I am new to embedded webserving and would like some tips.
      Is there a good general overview of the process to create a website using emWeb?
      I have a emPower board and am working on changing the demo website to create my own.
      At the moment I am using various parts of embOS/IP User Guide to try to understand how to do it, i.e. "42.2.3 Using the read-only file system".
      It says to make the changes and "recompile your application" but that does almost nothing but give errors.
      I tried to run the m.bat manually but more errors. Bin2C.exe was not in Tool, move it there and seems to generate the .c and .h files.
      Some questions.
      1. Do I need to "compile" the .htm, .css, .gif files with m.bat/cc.bat/Bin2C.exe?
      2. Can I just put the files in a "File System" and use them like a typical website?
      3. What is the better way of 1. & 2. if 2. even works?
      4. I am making these changes in C:\Programming\Segger_emPower\IP\Setup\IP_FS\FS_RO...
      I get compile errors like it is still looking for files that I commented out, see below. Do you know why?
      Thanks
      Pete

      static IP_FS_READ_ONLY_FILE_ENTRY _aFile[] = {
      // path file data file size
      // ------------------- -------------- -------------
      { "/index.htm", index_file, INDEX_SIZE },
      { "/anwebpg.html", awp_file, AWP_SIZE },
      { "/Styles.css", styles_file, STYLES_SIZE },
      { "/Logo_PT.gif", logo_pt_file, LOGO_PT_SIZE },
      { "/Logo_Dyn.gif", logo_dyn_file, LOGO_DYN_SIZE },
      /*
      { "/Error404.htm", error404_file, ERROR404_SIZE },
      { "/favicon.ico", favicon_file, FAVICON_SIZE },
      { "/BGround.png", bground_file, BGROUND_SIZE },
      { "/Styles.css", styles_file, STYLES_SIZE },
      { "/Logo.gif", logo_file, LOGO_SIZE },
      { "/About.htm", about_file, ABOUT_SIZE },
      ...
      */


      4> ../../../IP/Setup/IP_FS/FS_RO/Generated/BTL_Det.c does not exist.
      4> Compiling ‘BTL_Det.c’
      4> "C:/Program Files/SEGGER/SEGGER Embedded Studio for ARM 4.12/gcc/arm-none-eabi/bin/cc1" -fmessage-length=0 -fno-diagnostics-show-caret -mcpu=cortex-m4 -mlittle-endian -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -mthumb -mtp=soft -munaligned-access -nostdinc "-isystemC:/Program Files/SEGGER/SEGGER Embedded Studio for ARM 4.12/include" "-isystemC:/Users/pbecher/AppData/Local/SEGGER/SEGGER Embedded Studio/v3/packages/include" -IC:/Programming/Segger_emPower/BSP/SEGGER/K66FN2M0_emPower/Setup/ -IC:/Programming/Segger_emPower/BSP/SEGGER/K66FN2M0_emPower/Setup/DeviceSupport -IC:/Programming/Segger_emPower/BSP/SEGGER/K66FN2M0_emPower/Setup/CoreSupport -IC:/Programming/Segger_emPower/SEGGER -IC:/Programming/Segger_emPower/COMPRESS/Inc -IC:/Programming/Segger_emPower/COMPRESS/Config -IC:/Programming/Segger_emPower/CRYPTO/Inc -IC:/Programming/Segger_emPower/CRYPTO/Config -IC:/Programming/Segger_emPower/OS/Inc -IC:/Programming/Segger_emPower/OS/Config -IC:/Programming/Segger_emPower/FS/Config -IC:/Programming/Segger_emPower/FS/Inc -IC:/Programming/Segger_emPower/GUI/Config -IC:/Programming/Segger_emPower/GUI/Setup/K66FN2M0_SEGGER_emPower -IC:/Programming/Segger_emPower/GUI/Inc -IC:/Programming/Segger_emPower/IOT/Config -IC:/Programming/Segger_emPower/IOT/Inc -IC:/Programming/Segger_emPower/IP/Config -IC:/Programming/Segger_emPower/IP/Inc -IC:/Programming/Segger_emPower/IP/Setup/IP_FS/FS_RO/Generated -IC:/Programming/Segger_emPower/IP/Setup/IP_FS/FS_RO/Generated -IC:/Programming/Segger_emPower/MB/Inc -IC:/Programming/Segger_emPower/MB/Config -IC:/Programming/Segger_emPower/USB-D/Config -IC:/Programming/Segger_emPower/USB-D/Inc -IC:/Programming/Segger_emPower/USB-H/Config -IC:/Programming/Segger_emPower/USB-H/Inc -IC:/Programming/Segger_emPower/SECURE/Inc -IC:/Programming/Segger_emPower/SECURE/Config -IC:/Programming/Segger_emPower/SECURE/Keys -IC:/Programming/Segger_emPower/SSH/Inc -IC:/Programming/Segger_emPower/SSH/Config -IC:/Programming/Segger_emPower/SSL/Inc -IC:/Programming/Segger_emPower/SSL/Config -IC:/Programming/Segger_emPower/SSL/Certificates -IC:/Programming/Segger_emPower/Application/GUI/SEGGERDEMO -IC:/Programming/Segger_emPower/Application/GUI/SEGGERDEMO/Src -IC:/Programming/Segger_emPower/Application/GUI/SEGGERDEMO_160x128 -IC:/Programming/Segger_emPower/Application/GUI/SEGGERDEMO_160x128/Src -D__SIZEOF_WCHAR_T=4 -D__ARM_ARCH_7EM__ -D__SES_ARM -D__ARM_ARCH_FPV4_SP_D16__ -D__SES_VERSION=41200 -DDEBUG=1 -DUSE_RTT=1 -DMK66FN2M0xxx18 -D__Kinetis_K60_FAMILY -DARM_MATH_CM4 -DIP_SUPPORT_IPV6=1 -MD C:/Programming/Segger_emPower/BSP/SEGGER/K66FN2M0_emPower/Output/Debug/BTL_Det.d -MQ C:/Programming/Segger_emPower/BSP/SEGGER/K66FN2M0_emPower/Output/Debug/BTL_Det.o -Wall -Wextra -Wstrict-prototypes -quiet -Wall -Wextra -Wunused-variable -Wmaybe-uninitialized -Wmissing-field-initializers -Wundef -ffunction-sections -fdata-sections -Wmissing-prototypes -std=gnu99 -g3 -gpubnames -fomit-frame-pointer -fno-dwarf2-cfi-asm -fno-builtin -ffunction-sections -fdata-sections -fshort-enums -fno-common C:\Programming\Segger_emPower\IP\Setup\IP_FS\FS_RO\Generated\BTL_Det.c -o C:/Programming/Segger_emPower/BSP/SEGGER/K66FN2M0_emPower/Output/Debug/BTL_Det.asm
      1> cc1: fatal error: C:\Programming\Segger_emPower\IP\Setup\IP_FS\FS_RO\Generated\About.c: No such file or directory
      1> compilation terminated.
      3> cc1: fatal error: C:\Programming\Segger_emPower\IP\Setup\IP_FS\FS_RO\Generated\Authen.c: No such file or directory
      3> compilation terminated.
      2> cc1: fatal error: C:\Programming\Segger_emPower\IP\Setup\IP_FS\FS_RO\Generated\BGround.c: No such file or directory
      2> compilation terminated.
      4> cc1: fatal error: C:\Programming\Segger_emPower\IP\Setup\IP_FS\FS_RO\Generated\BTL_Det.c: No such file or directory
      4> compilation terminated.
      Build failed
    • New

      Hi

      I am working through my lack of knowledge.
      I got my website to compile and it is running.

      I would still like to know about 1, 2, & 3 if someone can give me some information on this.

      dynapb wrote:

      Some questions.
      1. Do I need to "compile" the .htm, .css, .gif files with m.bat/cc.bat/Bin2C.exe?
      2. Can I just put the files in a "File System" and use them like a typical website?
      3. What is the better way of 1. & 2. if 2. even works?

      Thanks
      Pete