Hi

I'm using J-Flash on Windows XP, connected through J-Link to an ARM7 JTAG. Once in 10 or 20 times, on average, I get the following error:

- Erasing affected sectors ...
- Erasing sector 0, 1, 2, 3, 5, 6, 7, 23, 24, 25, 26
- ERROR: PC of target system has unexpected value after erasing sector. (PC = 0x00000000, CPSR = 0x400000D3, LR = 0x0020019E)!
- ERROR: Failed to erase sectors
- ERROR: Failed to auto program target


Is there any information that can be known from this error message? Does it point to any one specific JTAG pin?

Thanks,

AlanJ

I found it: My Reset line connection was breaking up (i.e. intermittently touching). Once I fixed it the problem seems to have gone away. Thanks for your help!

Alan