I have gotten EK-TM4C1294XL + CCS + Jlink Edu Mini to work. So I believe my CCS + JLINK works.
I cannot get LaunchXL CC26X2R1 + Code Composer + JLINK Edu Mini to work
CCS: Version: 8.0.0.00016
SEGGER J-Link Support 6.44.1.0
SEGGER J-Link USB Driver 1.0.0.6
Windows 10
Today the JLINK firmware was updated by CCS (did not change a thing)
With CCS I get:
Cortex_M4_0: Error: Stat [ JLINKARM_IsHalted() call ] failed!
Cortex_M4_0: GEL: Error while executing OnTargetConnect(): Evaluation canceled
Cortex_M4_0: Unable to determine target status after 20 attempts
Within JLink commander I have:
J-Link>connect
Please specify device / core. <Default>: CC2652R1F
Type '?' for selection dialog
Device>
Please specify target interface:
J) JTAG (Default)
S) SWD
T) cJTAG
TIF>J
Device position in JTAG chain (IRPre,DRPre) <Default>: -1,-1 => Auto-detect
JTAGConf>
Specify target interface speed [kHz]. <Default>: 4000 kHz
Speed>
Device "CC2652R1F" selected.
Connecting to target via JTAG
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
****** Error: InitTarget(): PCode returned with error code -1
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
****** Error: InitTarget(): PCode returned with error code -1
Cannot connect to target.
I have the following connections and have verified the voltages where indicated:![](https://forum.segger.com/index.php/Attachment/3193-CC26X2Settings2-png/?s=757b4fd8e5d8619b8abf1095df1a0c8e65da5f37)
Others have said they have no problem.
I have also tried without external power and just the GND, 5V and 3V3 + USB connected. Same thing.
Any suggestions would be appreciated.
I cannot get LaunchXL CC26X2R1 + Code Composer + JLINK Edu Mini to work
CCS: Version: 8.0.0.00016
SEGGER J-Link Support 6.44.1.0
SEGGER J-Link USB Driver 1.0.0.6
Windows 10
Today the JLINK firmware was updated by CCS (did not change a thing)
With CCS I get:
Cortex_M4_0: Error: Stat [ JLINKARM_IsHalted() call ] failed!
Cortex_M4_0: GEL: Error while executing OnTargetConnect(): Evaluation canceled
Cortex_M4_0: Unable to determine target status after 20 attempts
Within JLink commander I have:
J-Link>connect
Please specify device / core. <Default>: CC2652R1F
Type '?' for selection dialog
Device>
Please specify target interface:
J) JTAG (Default)
S) SWD
T) cJTAG
TIF>J
Device position in JTAG chain (IRPre,DRPre) <Default>: -1,-1 => Auto-detect
JTAGConf>
Specify target interface speed [kHz]. <Default>: 4000 kHz
Speed>
Device "CC2652R1F" selected.
Connecting to target via JTAG
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
****** Error: InitTarget(): PCode returned with error code -1
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
****** Error: InitTarget(): PCode returned with error code -1
Cannot connect to target.
I have the following connections and have verified the voltages where indicated:
Others have said they have no problem.
I have also tried without external power and just the GND, 5V and 3V3 + USB connected. Same thing.
Any suggestions would be appreciated.