Hi,

We are using the Segger Emulator JLink Pro for programming our hardware TMS570LS0714 (ARM Cortex-R4F) and using the IDE IAR EWARM 8.22.
However, when we are trying to Download and Debug using the IDE IAR EWARM 8.22 , we are getting an error message (as follows). Attached are the screen shots of error message and error log.
Please could you let us know the solution to debug using the JLink Pro.

Error Message: (Attached screenshot)
CPU-TAP not found in JTAG chain
Abort debug session?

Error Log: (Attached screenshot)
IAR Embedded Workbench 8.22.2 (C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.0\arm\bin\armproc.dll)
Loaded macro file: C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.0\arm\config\debugger\TexasInstruments\TMS570LS.dmac
JLINK command: ProjectFile = D:\CM3620\Project\tms570ls0714\settings\basic_test_Debug.jlink, return = 0
Device "TMS570LS0714PGE" selected.
JTAG speed is fixed to: 50 kHz
Initial reset was performed
TotalIRLen = 6, IRPrint = 0x01
JTAG chain detection found 1 devices:
#0 Id: 0x0BB0302F, IRLen: 06, Unknown device
TotalIRLen = 6, IRPrint = 0x01
JTAG chain detection found 1 devices:
#0 Id: 0x0BB0302F, IRLen: 06, Unknown device
IAR Embedded Workbench 8.22.2 (C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.0\arm\bin\armproc.dll)

Other Details:
Segger Emulator: JLink Pro
Hardware: TMS570LS0714 (ARM Cortex-R4F)
IDE: IAR EWARM 8.22

Thanks and regards,
Abrar